MTL5500 Series enclosures

MTL5500 Series enclosures

SPECIFICATION

Construction

Glass reinforced polycarbonate base - DX070

Glass reinforced polyester base - DX170

Transparent polycarbonate lid

Protection

Dust-tight and water-jet proof to IEC529:IP65

Lid fixing

Captive fixing screws

Weight (excluding barriers/isolators) kg

DX070  0.8

DX170  2.6

Items provided

DIN rail - fitted

ETL7000 Earth terminals (2 x) - fitted

"Take care IS" front adhesive label

Cable trunking (except DX070)

Note: Isolators are not included.

Mounting

Wall fixing lugs provided. For further details refer to INM5500.

Tagging and earth rail

Accommodates MTL5500 Series accessories.

Permitted location

Safe (non-hazardous) area

Note: N. America/Canada - Enclosures are rated NEMA 4X so can be used in Class 1, Division 2 (gases) location, but check with local requirements and ensure all cable entries also conform. Additional warning label will be required on or near the enclosure, see installation details. Not suitable for Class II or III, Division 2 hazardous locations.

Approximate capacities (on DIN rail between earth terminals)

* Use these figures when IMB57 mounting blocks for tagging/earth are included.

Ambient temperature limits

Dependent on units fitted. See instruction manual INM5500.