ASIA SCIENCE&TECHNOLOGY COMPANY LIMITED
Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home News

MTL4500-5500_Enclosures_Accessories

I'm Online Chat Now
Company News
MTL4500-5500_Enclosures_Accessories

MPA5500  A.C. POWER ADAPTOR

The MPA5500 enables any MTL5500 Series module that is normally powered from a nominal 24V DC supply (i.e. those that are not loop-powered) to be powered from a high-voltage AC supply.

It plugs into the power socket (terminals 13 and 14) of an MTL5500 module and clips securely onto the module housing. The 25V DC power output from the adaptor is sufficient to supply a single module and can be connected to any normal AC power source.

SPECIFICATION

Input voltage

85 – 265V AC, (45–65Hz)

Efficiency

71% typ. at 230V AC

Power dissipation

1.2W typ at 230V AC.

Input terminals

Cage-clamp terminals accommodating conductors up to 1.5mm2 stranded or 16AWG single-core

Input protection

internal fuse, not user serviceable

Output voltage

25Vdc ± 10%

Output current

120mA at 25V

Ambient temperature

Operating:  –20 to +60°C

Storage:  –40 to +80°C

Mounting

Plugs into and clips onto MTL5500 Series I/O module

It is not for use with any equipment other than MTL5500.

Humidity

5 to 95% relative humidity

Mechanical

Ingress Protection:   IP20

Material:   polycarbonate

Weight:   28g approx.

Standards compliance

EN 61326, EN 61010

PCS45/PCL45USB CONFIGURATOR FOR MTL CONVERTERS

The PCS45/PCL45USB configurator allows MTL converters to be configured from a standard PC running a Microsoft® Windows® operating system. It comprises PC software, provided on a CD (PCS45), and an ATEX certified interfacing link (PCL45USB). Converters can be configured from the safe area, while on-line, and configurations can be saved to disk and printed out when required. It is suitable for use with MTL4000, MTL4500, MTL5000 and MTL5500 series products.

SPECIFICATION

PcL45uSB hardware

Location

Safe area

Connections

Pc side: USB B(F) socket

Converter side: cable with 3.5mm jackplug, 3-pole for MTL4500 and MTL5500 series converters. An adapter cable is provided for other earlier MTL converters.

Cable lengths

Converter side (fitted): 1.5m

USB cable A(M) to B(M) (supplied): 2m

Ambient temperature limits

–10°C to +60°C operating

–20°C to +70°C storage

Humidity

5 to 95% relative humidity (non-condensing)

Weight

200g

PcS45 configuration software

Compatible with Windows 2000, Windows XP or Windows 7

Consult MTL for operation with any other operating system, 

e.g. Windows Vista™.

Software medium

PCS45 supplied on CD

Updates are available at www.mtl-inst.com

Recommended minimum Pc configuration

Microsoft Windows 2000, Windows XP or Windows 7

20MB of available hard disc space

CD ROM drive

Available USB port

Printer (local or network)

MTL5991 24V Dc POWER SUPPLY

A DIN-rail mounted unit for locations where a dc supply is not readily available.  The wide input power supply range makes this unit universally applicable and the 24V dc, 2A output will drive a useful number of MTL5000 and MTL5500 series modules.

SPECIFICATION

Power supply

85 to 264V ac  47 to 63Hz

Power dissipation within unit

7.2W @ 2A

Mounting

35mm DIN (top hat) rail

Output voltage

24V dc nom (23.64 min/24.36 max)

Output current

2A maximum (1.7A with <105V ac input)

LED indicators

Green: Power indication

Weight

310g

Ambient temperature

Operating temperature –10°C to +50°C

Storage temperature –40°C to +85°C

Terminals

Cage clamp type accommodating conductors up to 2.5mm2, stranded or single-core

Note: Segregation between hazardous and safe area wiring must be maintained.

MTL5500 SERIES POWERBUS KITS PB - 8T,16T,24T,32T

A quick and easy way to distribute DC power to MTL5500 Series modules. Each powerbus kit includes 4 single ferrules, 4 twin ferrules and 2 insulation displacement connectors (Scotchlok).

SPECIFICATION

Available in 4 different lengths:

PB - 8T   =   8 connectors and loops

PB - 16T   = 16 connectors and loops

PB - 24T   = 24 connectors and loops

PB - 32T   = 32 connectors and loops

Insulation material :

PVC

Conductor:

24 strands of 0.2mm dia (0.75mm2) standard copper

Insulation thickness :

0.5 to 0.8 mm

Current rating :

12A max

Operating temperature range :

–20ºC to +60ºC

Max voltage drop on 32 modules drawing 130ma max :

0.5V

CHOOSING A POWERBUS KIT

Choose a powerbus where the number of power plugs is greater than or equal to the number of isolators to be powered and if necessary cut the powerbus to the required number of terminations.

Note: To reduce the risk of excessive voltage drop or overcurrent do not connect powerbuses in series.

MTL5500 Series enclosures

SPECIFICATION

Construction

Glass reinforced polycarbonate base - DX070

Glass reinforced polyester base - DX170

Transparent polycarbonate lid

Protection

Dust-tight and water-jet proof to IEC529:IP65

Lid fixing

Captive fixing screws

Weight (excluding barriers/isolators) kg

DX070  0.8

DX170  2.6

Items provided

DIN rail - fitted

ETL7000 Earth terminals (2 x) - fitted

"Take care IS" front adhesive label

Cable trunking (except DX070)

Note: Isolators are not included.

Mounting

Wall fixing lugs provided. For further details refer to INM5500.

Tagging and earth rail

Accommodates MTL5500 Series accessories.

Permitted location

Safe (non-hazardous) area

Note: N. America/Canada - Enclosures are rated NEMA 4X so can be used in Class 1, Division 2 (gases) location, but check with local requirements and ensure all cable entries also conform. Additional warning label will be required on or near the enclosure, see installation details. Not suitable for Class II or III, Division 2 hazardous locations.

Approximate capacities (on DIN rail between earth terminals)

* Use these figures when IMB57 mounting blocks for tagging/earth are included.

Ambient temperature limits

Dependent on units fitted. See instruction manual INM5500.

 

Number of MTL5500 isolators

DX070

4

(2)*

DX170

10

(8)*

MTL CPS STANDARD BACKPLANES

Backplane
model no.

number of
modules

Safe-area
connections

MOUNTING KITS

ACCESSORIES

Surface

DIn–rail
(T or G)

19–inch
rack

earth–rail
kit

Tagging
strip kit

Spare fuse
pack

CPS04

4

Screw–clamp

SMS01

DMK01

 

FUS1.0ATE5

CPS08

8

Screw–clamp

SMS01

DMK01

ERK08

TSK08

FUS1.0ATE5

 

 

 

 

 

 

 

 

FUS2.0ATE5

CPS16

16

Screw–clamp

SMS01

DMK01

ERK16

TSK16

or

 

 

 

 

 

 

 

 

FUS2.5ATE5

CPS24

24

Screw–clamp

SMS01

DMK01

HMP24

TSK24

FUS4.0ATE5

 

 

 

 

 

 

 

 

 

 

 

 

 

CUSTOM BACKPLANES

MTL4500 series backplanes can be customised for specific applications and customer’s requirements. All the signals on the backplane are ‘safe-area’ so custom designs are possible without the need for certification. MTL offers a fast and efficient customising service upon request.

Many installations can benefit from the use of existing custom solutions. These provide reduced system wiring, modularisation of the channels to match the IO card. In addition diagnostics, such and line fault detection, can be grouped prior to connection into the system.

Remote cable connections:

In addition to the many DCS solutions, listed on a previous page, are backplanes and cables that are ideal when the isolators are mounted in remote cabinets and the signals need to be returned to the system via a multicore cable.

CP-DYN SERIES

FTA

Size

 Function

MTL modules

CP-DYNB-AIO

B

16ch analogue input /output

MTL4541, 4546Y, 4575

CP-DYNB-AI250

B

16ch analogue input

MTL4541, 4575

CP-DYNA-2AIO

A

16ch analogue input / outpu

MTL4544, 4549Y

CP-DYNB-DI

B

16ch digital input

MTL4511, 4514

CP-DYNB-DILF

B

16ch digital input with LFD

MTL4514

CP-DYNB-2DI

B

32ch digital input

MTL4513, 4516, 4517

CP-DYNB-4DI

B

48ch digital input

MTL4510

CP-DYNB-DO

B

16ch digital output

MTL4521, 4521L  

CABLES

All FTAs use the Tyco 20 pin Dynamic series of connectors. Cables are fitted with a mating connector and free ends the other, for connection to the system card.

Cable ordering code

CABDYN20-0.5   0.5m cable

CABDYN20-1    1.0m

CABDYN20-2    2.0m

CABDYN20-3    3.0m

CABDYN20-5    5.0m

CABDYN20-8    8.0m

CABDYN20-10   10m

CABDYN20-15   15m

CABDYN20-20   20m

CABDYN20-25   25m

CABDYN20-30   30m

CPELCO SERIES

A range of dedicated backplanes to interface with MTL4500 series intrinsically safe isolator modules and the MTL HART maintenance system products. The backplanes offer a standard Elco interface connector for use in systems where the IS interfaces are remote from the DCS.

Backplane

Function

MTL module

Cable

CPM08-2AIO

16ch AI 4-20

MTL4544/4576/4549Y x 8 

Elco38 x 1

CPM08-2AV

16ch AI 1-5V

MTL4544/4576 x 8 

Elco38 x 1

CPM16-AIO

16ch AIO 4-

MTL4541/4575/4546Y 

Elco38 x 1

CPM16-2AIO

32ch AI 4-2

MTL4544/4576/4549Y x 16 

Elco38 x 2

CPM16-2AV

32ch AI 1-5V

MTL4544/4576 x 16 

Elco38 x 2

CPM08-DDI

16ch DI

MTL4513/4516

Elco38 x 1

CPM16-DO

16ch DO

MTL4524/4523R

Elco38 x 1

CGM08-DO

8ch DO

MTL4521/4521L (loop powered)

Elco38 x 1

 

Pub Time : 2015-07-09 15:26:44 >> News list
Contact Details
ASIA SCIENCE&TECHNOLOGY COMPANY LIMITED

Contact Person: Ms. Steven

Tel: 86-21-58111208

Fax: 86-21-58111208

Send your inquiry directly to us (0 / 3000)