|
Product Details:
Payment & Shipping Terms:
|
Analogue outputs
Controller outputs (I/P converters)
The single-channel MTL7728+ with a voltage drop of 6.66V at 20mA is the recommended choice for most controller outputs. Higher-power versions are available: the MTL7728P+ (5.1V drop) is suitable for IIC applications; the MTL7729P+ (3.68V drop) for IIB applications.
For controllers with an output circuit separated from the 0V rail by the control transistor, the 2-channel MTL7787+ is the preferred choice as the return channel can handle up to 26.6V allowing the control signal to be turned off completely. The voltage drop is 8.1V at 20mA. A higherpower version of the latter, the MTL7787P+, is also available. The return channel of these barriers handle up to 26.4V and the maximum voltage drop is only 6.38V.
The MTL7787+ and MTL7787P+ are also suitable for controllers containing a resistor which enables the return current to be monitored for high-integrity operation.
⇒Contact E-mail: info@mtl-instruments.com; mtl_inst@yeah.net
⇒Contact Person: Mr. Steven
⇒Website: www.mtl-instruments.com
Sell MTL5511 Barrier Manufactured by MEASUREMENT TECHNOLOGY LTD
Sell MTL5513 Barrier Manufactured by MEASUREMENT TECHNOLOGY LTD
Sell MTL5514 Barrier Manufactured by MEASUREMENT TECHNOLOGY LTD
Sell MTL5544D Barrier Manufactured by MEASUREMENT TECHNOLOGY LTD
MTL5516C SWITCH/ PROXIMITY DETECTOR INTERFACE 2-CHANNEL, WITH LINE FAULT DETECTION
MTL5525 SOLENOID/ALARM DRIVER SWITCH OPERATED WITH OVERRIDE, IIC, LOW POWER
MTL5514D SWITCH/ PROXIMITY DETECTOR INTERFACE 1-CHANNEL, DUAL OUTPUT, LFD, PHASE REVERSAL
MTL5544D REPEATER POWER SUPPLY SINGLE CHANNEL, 4/20MA, HART® FOR 2- OR 3-WIRE TRANSMITTERS
MTL7743 2 channel proximity sensor or switch input and relay outputs
MTL7743 2 channel proximity sensor or switch input and relay outputs
MTL7745 proximity sensor or switch input with relay output and line fault detect
MTL7742 proximity sensor or switch input with solid state output
