About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsMTL Barrier

MTL5532 (pulse & 4/20mA current outputs)

MTL5532 (pulse & 4/20mA current outputs)

MTL5532 (pulse & 4/20mA current outputs)

Product Details:

Place of Origin: England
Brand Name: MTL
Model Number: MTL5532

Payment & Shipping Terms:

Minimum Order Quantity: 1pc
Price: according to the purchase quantity
Packaging Details: original MTL packing
Delivery Time: in stock
Payment Terms: T/T payment
Supply Ability: 100pcs
Contact Now
Detailed Product Description

MTL5532 pulse & 4/20mA current outputs
MTL5532 isolates pulses from a switch, proximity detector, current pulse transmitter or voltage pulse transmitter located in a hazardous area. It is ideal for applications involving high pulse rates and fast response times, by repeating the pulses into the safe area. An analogue output proportional to frequency is also provided, together with a relay output, which may be configured to act as an alarm. Configuration is carried out with a personal computer.
See also common specification
Number of channels
One, fully floating
Sensor type
Switch or proximity detector (NAMUR/BS EN 60947-5-6:2001)
2-or 3-wire voltage or pulse transmitter
Location of switch
Zone 0, IIC, T6 hazardous area
Div. 1, Group A, hazardous location
Location of proximity detector or transmitter
Zone 0, IIC, T4–T6 if suitably certified
Div.1, Group A, hazardous location
Switch input:
Output ON if switch is closed
Proximity detector input:
Excitation: 7.0 to 9.0V dc from 1kΩ nominal
Output ON if input > 2.1mA* (< 2kΩ)
Output OFF if input < 1.2mA* (> 10kΩ)
Switching hysteresis: 0.2mA (650Ω) nominal
*NAMUR and BS EN 60947-5-6:2001standards
Current pulse input:
Transmitter supply: 16.5V dc at 20mA
Short circuit current: 24mA
Output: Iin > 9.0mA = ON, Iin < 7.0mA = OFF
Switching hysteresis: 0.5mA
Voltage pulse input
Input impedance: > 10kΩ
Switching point voltage (Vsp): 3, 6, or 12V nominal
(User selectable by switches on the side of the module)
Output: Vin > Vsp = ON, Vin < Vsp = OFF
Switching hysteresis: 100mV + (0.1 x Vsp) typical
Safe-area pulse output
Maximum delay: 10µs
Maximum off-state voltage: 35V
Maximum off-state leakage current: 10µA
Maximum on-state resistance: 25Ω
Maximum on–state current: 50mA
Output OFF if supply fails
Note: LFD signal is Zener-diode protected against inductive loads
Safe-area current output
Input capture delay: 2 signal periods (5ms min.)
Signal range: 4 to 20mA
Under/over range: 0 to 22mA
Load resistance: 0 to 450Ω @20mA
Output resistance: >1MΩ
Ripple: < 50µA peak-to-peak
Accuracy: better than 20µA at 20°C
Temperature drift: < 1µA/°C
Risetime (10% - 90%, after step change): 60 ms
alarm output
Relay ON in alarm, 0.5A @ 35Vdc max.

Contact Details

Contact Person: Ms. Steven

Send your inquiry directly to us (0 / 3000)

Other Products
Request A Quote

| Sitemap

Privacy Policy | China MTL Barrier Supplier. Copyright © 2016 - 2022 All Rights Reserved. Developed by ECER