MTL5314 TRIP AMPLIFIER 4/20mA, for 2- or 3-wire transmitters

MTL5000 SERIES COMMON SPECIFICATION

Connectors

Each MTL5000 unit is supplied with signal and power connectors,

as applicable.

When using crimp ferrules for the hazardous and non-hazardous

(safe) signal connectors the metal tube length should be 12mm

and the wire trim length 14mm. For the power connectors the

metal tube length should be 10mm and the wire trim length

12mm.

See INM5000 for recommended ferrules.

Isolation

250V rms between input, output and power supply terminals,

tested at 1500V rms minimum between safe- and hazardous-area

terminals. MTL5073, output and power supply not isolated.

Location of units

Safe area

Terminals

Accommodate conductors of up to 2.5mm2 stranded or singlecore

Mounting

On 35mm (top hat) rail to :

EN 50022–35 x 7.5; BS 5584;

35 x 27 x 7.3 DIN 46277

Ambient temperature limits

–20 to +60°C (–6 to +140°F) operating

–40 to +80°C (–40 to +176°F) storage

Humidity

5 to 95% relative humidity

Weight

110g approx (except where indicated)