MTL4523L Solenoid/ Alarm Driver Loop-Powered With Line Fault Detection, Iic With the MTL4523L interface, an on/off device in a hazardous area can be controlled by a voltage signal in the safe area. It is ... Read More
MTL4524S Solenoid/Alarm Driver Switch Operated With 24V Override, Iic MTL4524S enables an on/off device in a hazardous area to be controlled by a volt-free contact or a floating logic signal in the safe area. ... Read More
MTL4524 Solenoid/Alarm Driver Switch Operated With Override, Iic MTL4524 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads ... Read More
MTL4525 Solenoid/Alarm Driver Switch Operated With Override, Iic, Low Power MTL4525 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can ... Read More
MTL4526 Switch operated relay 2–channel IS–output MTL4526 enables two separate IS circuits in a hazardous area to be contact controlled by one or two, on/off, control signals in a safe area. Applications ... Read More
MTL4541A/AS current repeater 4/20mA passive i/p for HART® transmitters MTL4541A provides an input for separately powered 4/20mA transmitters and also allows bi–directional transmission of HART communication ... Read More
MTL4541B Repeater Power Supply 4/20Ma, Hart®, For 2- Or 3-Wire Transmitters MTL4541B provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter which is located in a ... Read More
MTL4541P repeater power supply 4/20mA, HART®, for 2- or 3-wire transmitters MTL4041P replacement MTL4541P provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter which ... Read More
MTL4541/S repeater power supply 4/20mA, HART®, 2- or 3-wire transmitters MTL4541/S provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter, which is located in a ... Read More
MTL4541T Repeater power supply 4/20mA, 2- or 3-wire transmitters using long field lines MTL4541T provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter, which is ... Read More