MTL5500 Series Safety Barriers

MTL5500 Series The MTL5500 is designed with the same 16mm case width and similar profile to the MTL5000 series. This permits the replacement of an MTL5000 module with the new equivalent in the MTL5500 range. In ... Read More

MTL5500 Series The MTL5500 is designed with the same 16mm case width and similar profile to the MTL5000 series. This permits the replacement of an MTL5000 module with the new equivalent in the MTL5500 range. In ... Read More

MTL5500 Series The MTL5500 is designed with the same 16mm case width and similar profile to the MTL5000 series. This permits the replacement of an MTL5000 module with the new equivalent in the MTL5500 range. In ... Read More

MTL5500 Series The MTL5500 is designed with the same 16mm case width and similar profile to the MTL5000 series. This permits the replacement of an MTL5000 module with the new equivalent in the MTL5500 range. In ... Read More

MTL5599 - Dummy Isolator The primary function of the MTL5599, is to provide termination and earthing facilities for unused cable cores from hazardous areas, that can occur, for example, if any MTL5500 Series ... Read More

Temperature Input module These modules accept inputs from low-level dc sources such as thermocouples or RTDs in hazardous areas and converts them into 4/20mA signals to drive safe area loads. Early burnout ... Read More

Temperature Input module These modules accept inputs from low-level dc sources such as thermocouples or RTDs in hazardous areas and converts them into 4/20mA signals to drive safe area loads. Early burnout ... Read More

Temperature Input module These modules accept inputs from low-level dc sources such as thermocouples or RTDs in hazardous areas and converts them into 4/20mA signals to drive safe area loads. Early burnout ... Read More

Fire and smoke Interface modules Interfaces for use with conventional fire and smoke detectors located in hazardous areas. MTL5561 - Fire and smoke Detector Interface Two channel The MTL5561 is a loop-powered 2... Read More

Analogue output modules The analogue output (AO) modules accept 4/20mA floating signals from safe-area controllers to drive current/pressure converters (or any other load up to 800Ω) in a hazardous area. ... Read More