MTL5500 Series Isolators

MTL5524 Solenoid/Alarm Driver Switch Operated With Override, Iic MTL5524 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads ... Read More

MTL5510B Switch/ Proximity Detector Interface 4-Channel, Multi-function, Digital Input MTL5510B enables four solid-state outputs in the safe area to be controlled by up to four switches or proximity detectors ... Read More

MTL5581 (Isolator for low-level signals) MTL5581 takes a low-level dc signal from a voltage source in a hazardous area, isolates it, and passes it to a receiving instrument located in the safe area. The module ... Read More

MTL5582 RESISTANCE ISOLATOR to repeat RTD signals MTL5582 connects to a 2-, 3-, or 4-wire resistance temperature device (RTD) or other resistance located in a hazardous area, isolates it and repeats the ... Read More

MTL5549/Y two-channel, for 4–20mA, HART® valve positioners with line fault detection MTL5549 accepts 4/20mA floating signals from safe-area controllers to drive 2 current/pressure converters (or any other load ... Read More

MTL5546/Y for 4–20mA HART® valve positioners with line fault detection MTL5546 accepts a 4/20mA floating signal from a safe-area controller to drive a current/pressure converter (or any other load up to 800Ω) ... Read More

MTL5544/S 2-channel, 4/20mA, HART®, 2- or 3- wire transmitters MTL5544/S provides fully-floating dc supplies for energising two conventional 2-wire or 3-wire 4/20mA or HART transmitters located in a hazardous ... Read More

MTL5532 pulse & 4/20mA current outputsMTL5532 isolates pulses from a switch, proximity detector, current pulse transmitter or voltage pulse transmitter located in a hazardous area. It is ideal for applications ... Read More

MTL5541/S (4/20mA, HART®, 2- or 3-wire transmitters) MTL5541/S provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter, which is located in a hazardous area, and ... Read More

MTL5516/C Switch/ Proximity Detector Interface 2-Channel, With Line Fault Detection MTL5516/C enable two safe-area loads to be controlled by a switch or proximity detector located in a hazardous-area. When ... Read More