Modules In The MTL5500 Series

MTL5541/S (4/20mA, HART®, 2- or 3-wire transmitters) MTL5541/S provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter, which is located in a hazardous area, and ... Read More

MTL5524 Solenoid/Alarm Driver Switch Operated With Override, Iic MTL5524 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads ... Read More

MTL5516C Switch/ Proximity Detector Interface 2-Channel, With Line Fault Detection MTL5516C enable two safe-area loads to be controlled by a switch or proximity detector located in a hazardous-area. When ... Read More

MTL5510B Switch/ Proximity Detector Interface 4-Channel, Multi-function, Digital Input MTL5510B enables four solid-state outputs in the safe area to be controlled by up to four switches or proximity detectors ... Read More

MTL5581 (Isolator for low-level signals) MTL5581 takes a low-level dc signal from a voltage source in a hazardous area, isolates it, and passes it to a receiving instrument located in the safe area. The module ... Read More

MTL5514D SWITCH/ PROXIMITY DETECTOR INTERFACE 1-CHANNEL, DUAL OUTPUT, LFD, PHASE REVERSAL MTL5514D enables two safe–area loads to be controlled, through relays, by a proximity detector or switch located in a ... Read More