MTL Barrier

MTL5582 RESISTANCE ISOLATOR to repeat RTD signals MTL5582 connects to a 2-, 3-, or 4-wire resistance temperature device (RTD) or other resistance located in a hazardous area, isolates it and repeats the ... Read More

MTL5510B Switch/ Proximity Detector Interface 4-Channel, Multi-function, Digital Input MTL5510B enables four solid-state outputs in the safe area to be controlled by up to four switches or proximity detectors ... Read More

MTL5532 PULSE ISOLATOR MTL5532 isolates pulses from a switch, proximity detector, current pulse transmitter or voltage pulse transmitter located in a hazardous area. It is ideal for applications involving high ... Read More

MTL5514 (1-channel, line fault detection, phase reversal) Enables a safe–area load to be controlled, through a relay, by a proximity detector or switch located in a hazardous area. Line faults are signalled ... Read More

MTL5525 Solenoid/Alarm Driver Switch Operated With Override, Iic, Low Power MTL5525 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can ... Read More

MTL5532 pulse & 4/20mA current outputs MTL5532 isolates pulses from a switch, proximity detector, current pulse transmitter or voltage pulse transmitter located in a hazardous area. It is ideal for applications ... Read More

MTL5544D repeater power supply single channel, 4/20mA, HART® for 2- or 3-wire transmitters, two outputs MTL5544D provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter ... Read More

MTL5513 (2-channel, line fault detection, phase reversal) Enables two solid-state outputs in the safe area to be controlled by two switches or proximity detectors located in the hazardous area. The Ch1/Ch2 ... Read More

MTL5526 Switch operated relay 2–channel IS–output MTL5526 enables two separate IS circuits in a hazardous area to be contact controlled by one or two, on/off, control signals in a safe area. Applications ... Read More

MTL5546/Y for 4–20mA HART® valve positioners with line fault detection MTL5546 accepts a 4/20mA floating signal from a safe-area controller to drive a current/pressure converter (or any other load up to 800Ω) ... Read More