MTL5500 range

MTL5561 - Fire and Smoke Detector Interface Two channel MTL5561 is a loop-powered 2–channel interface for use with conventional fire and smoke detectors located in hazardous areas. In operation, the triggering ... Read More

MTL5573 - Temperature Converter Single channel, THC or RTD input MTL5573 converts a low-level dc signal from a temperature sensor mounted in a hazardous area into a 4/20mA current for driving a safe-area load. ... Read More

MTL5575 - Temperature Converter Single channel, THC or RTD input with alarm MTL5575 converts a low-level dc signal from a temperature sensor mounted in a hazardous area into a 4/20mA current for driving a safe... Read More

MTL5581 - mV/Thermocouple Isolator Single channel, mV/THC input for low power signals The MTL5581 takes a low-level dc signal from a voltage source in a hazardous area, isolates it, and passes it to a receiving ... Read More

MTL5582/MTL5582B - Resistance Isolator Single channel, to repeat RTD signals MTL5582 or MTL5582B connect to a 2-, 3-, or 4-wire resistance temperature device (RTD) or other resistance located in a hazardous ... Read More

MTL5510B SWITCH/ PROXIMITY DETECTOR INTERFACE 4-channel, multi-function, digital input The MTL5510B enables four solid-state outputs in the safe area to be controlled by up to four switches or proximity ... Read More

MTL5511 SWITCH/ PROXIMITY DETECTOR INTERFACE 1-channel, with line fault detection The MTL5511 enables a safe-area load to be controlled by a switch or proximity detector located in a hazardous-area. When chosen... Read More

MTL5514D SWITCH/ PROXIMITY DETECTOR INTERFACE 1-channel, dual output, LFD, phase reversal The MTL5514D enables two safe–area loads to be controlled, through relays, by a proximity detector or switch located in ... Read More

MTL5516C SWITCH/ PROXIMITY DETECTOR INTERFACE 2-channel, with line fault detection The MTL5516C enable two safe-area loads to be controlled by a switch or proximity detector located in a hazardous-area. When ... Read More

MTL5541/S REPEATER POWER SUPPLY 4/20mA, HART®, 2- or 3-wire transmitters The MTL5541 provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter, which is located in a ... Read More